一种基于共形阵的自适应单脉冲测角方法  

Adaptive Monopulse Angle Measurement for Conformal Array

作　　者：赵英俊[1,2] 李荣锋[1] 王永良[1] 刘维建[1] 

机构地区：[1]空军预警学院兵器运用工程军队重点实验室,武汉430019 [2]海军工程大学电子工程学院,武汉430019

出　　处：《电光与控制》2013年第7期15-18,共4页Electronics Optics & Control

基　　金：国家自然科学基金(60736009;60901071)

摘　　要：针对主瓣干扰背景下,当共形阵采用常规自适应单脉冲方法测角时,其单脉冲比曲线严重失真,导致测角精度严重下降的问题,提出了一种基于共形阵的自适应单脉冲测角方法。该方法首先对阵列进行常规自适应和波束形成,得到阵列和波束输出;然后通过施加单脉冲比约束求取自适应差波束权矢量,从而形成阵列差波束输出;最后利用输出的和、差波束实现测角。仿真结果表明,和常规方法相比,该方法能在抑制主瓣干扰的同时,较好地保证共形阵对目标方位角、俯仰角的测角精度。When conformal antennas array perform angle measurement based on the adaptive monopulse, the curve of monopulse ratio may be seriously distorted if there is mainlobe jamming. Consequently, the precision of the angle monopulse angle first. Then monopulse ratio urement is poor. In this paper, we propose a method of adaptive antennas array. The conventional adaptive sum beam is formed t for conformal restraint is posed, of the sum beam and difference beam are and the used to proposed method can suppress the mainlobe jamming and evaluation angles adaptive difference beam is formed. Finally, the outputs measure the angle. Simulation demonstrated that the and guarantee good measurement precision of azimuth

关 键 词：共形阵 自适应波束形成 单脉冲测角 主瓣干扰 干扰抑制 

分 类 号：V271.4[航空宇航科学与技术—飞行器设计] TN957[电子电信—信号与信息处理]