旋流火焰温度及烟黑颗粒浓度分布的联合重建研究  

Temperature and Soot Volume Fraction Distributions Reconstruction for Swirling Flame

作　　者：黄群星[1] 余渡江[1] 蔡旭[1] 王飞[1] 严建华[1] 池涌[1] 

机构地区：[1]能源清洁利用国家重点实验室(浙江大学),浙江省杭州市310027

出　　处：《中国电机工程学报》2013年第20期80-87,15,共8页Proceedings of the CSEE

基　　金：国家重点基础研究发展计划项目(973项目)(2009CB219802);浙江省自然科学基金项目(LY13E060003)~~

摘　　要：旋流燃烧火焰中温度及烟黑颗粒浓度分布对于旋流燃烧机理及燃烧器设计具有重要意义,提出了一种新的离散重建模型,用于旋流火焰内温度及烟黑颗粒浓度的三维联合重建。该模型以CCD为测量传感器,通过构建辐射逆问题求解方程,从CCD输出的辐射投影图像重建温度分布。通过数值模拟讨论了测量噪声、烟黑颗粒浓度对重建精度的影响,结果表明即使在有噪声的情况下,该模型也能获得准确的测量结果。文中实验测量了450kg/h重油旋流火焰内温度及烟黑颗粒体积浓度分布,温度测量结果与热电偶的差异在50℃以内。The distribution of temperature and soot volume fraction for swirling flame is very important for turbulent mechanism research and swirl burner design.Based on flame radiation inversion analysis,this paper proposed a 3-D temperature and soot volume fraction reconstruction model by using the CCD flame image detector.The performance of the proposed method was examined by a numerical simulation.The effects of noise and radiative properties on the reconstruction accuracy were discussed.The temperature and soot volume fraction for 450kg/h heavy oil fueled flame were measured.The results show that the proposed method was capable of reproducing the temperature and soot volume fraction for flame,even with noisy data.The difference of the temperature measurement with thermocouple was less than 50 ℃.

关 键 词：旋流火焰 温度分布 烟黑浓度 辐射能重建 

分 类 号：TK124[动力工程及工程热物理—工程热物理]