某天线振子的拉深成形工艺研究与应用  

Technology Research and Application for Drawing of an Antenna Oscillator

作　　者：胡佰毅[1] 

机构地区：[1]中国电子科技集团公司第二十研究所,西安710068

出　　处：《精密成形工程》2013年第4期43-45,共3页Journal of Netshape Forming Engineering

摘　　要：从实际的生产条件出发,依据拉深成形理论对天线振子的结构和工艺进行分析,提出了采用拉深成形替代车削加工成形的工艺方案,并且计算了拉深工艺参数,设计了拉深模具。通过试验和批量生产验证,采用新工艺加工的振子满足零件图纸的技术要求,符合装备调试的各项技术参数,缩短了加工周期,降低了生产成本。The structure and technology of an antenna oscillator is analyzed according to drawing theory on the basis of practical producing conditions. A scheme using drawing instead of maching is presented. The processing parameters of drawing are calculated. The drawing mould is designed. The oscillators by new technology meet technical requirements of component design papers, conform to technical parameters of equipping and adjusting, shorten processing period and reduce production cost through tests and batch produc- tion validation.

关 键 词：振子 拉深成形 工艺分析 模具 

分 类 号：TG386.33[金属学及工艺—金属压力加工]