检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:陈光龙[1] 徐红霞[1] 任莉[1] 汪丽莉[1] 曹云玖[1] 张修丽[1] 平云霞[1] Dong Eon Kim
机构地区:[1]上海工程技术大学基础教学学院,上海201620 [2]Department of Physics & Center for Attosecond Science and Technology(CASTECH),Pohang University of Science and Technology(POTECH), Pohang,Kyungbuk 790-784,Korea [3]Max Planck Center for Attosecond Science,Pohang,Kyungbuk 790-784,Korea
出 处:《物理学报》2013年第13期206-212,共7页Acta Physica Sinica
基 金:上海市科学技术委员会(批准号:11ZR1414500);上海市教委科技创新项目(批准号:11YZ216)资助的课题~~
摘 要:本文首先详细重演了锥形喷嘴的等效孔径deq,并根据deq的定义给出了它与气体团簇喷流的径向宽度之间的依赖关系.然后以高背压氩气团簇喷流为例,通过成像喷流的Rayleigh散射光的空间分布研究了不同背压下喷流的径向宽度,并与Hagena团簇尺度定律中直线流模型假设的喷流径向宽度进行了比较.结果表明,Hagena直线流模型假设的喷流径向宽度小于实际的径向宽度,且实际宽度与气体背压有关.进一步的研究表明,直线流模型对喷流宽度的估计偏差导致对锥形喷嘴等效孔径的估计偏差,这为Hagena尺度定律估计团簇平均尺寸的偏差给出了一种可能的解释.The cluster size is an important parameter in the study on the interaction of intense laser pulse with cluster jet produced by the gas adiabatic expansion through a nozzle into vacuum. The Hagena scaling law is usually used to estimate the average cluster size. However, there is the deviation of average cluster size from the prediction by the scaling law in the case that the conical nozzle is used at the high gas backing pressure. In this work, firstly the equivalent diameter of conical nozzle is re-calculated in detail, and then the relation between deq and the radial dimension of the cluster jet is obtained. As an example, the images of Rayleigh scattering light by argon cluster jet at different backing pressures are recorded to investigate the dimensions of cluster jet. And then the corresponding theoretical dimensions based on the idealized straight streamline model in the scaling law are compared with the experimental dimensions. It is found that the experimental dimension is larger than the theoretical one, and is related to the gas backing pressure. This under-estimation of theoretical cluster jet dimension leads to the over-estimation of the equivalent diameter of conical nozzle which is responsible for the cluster size deviation in Hagena scaling laws.
关 键 词:气体团簇 Hagena尺寸定律 锥形喷嘴的等效孔径
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:3.137.156.0