检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:温馨[1] 邢芳俭[1] 杨四刚[1] 陈宏伟[1] 陈明华[1] 谢世钟[1]
出 处:《光电子.激光》2013年第7期1422-1425,共4页Journal of Optoelectronics·Laser
基 金:国家自然科学基金(60736002;60807026;61090391);国家"973"重点基础研究发展计划(2012CB315703)资助项目
摘 要:针对传统成像技术的成像速度慢且灵敏度低,本文采用光波映射展宽技术搭建一个一维稀疏图像实时获取系统,以实现高速图像的实时获取。基于空间光栅的空-频映射以及色散光纤的频-时映射,充分利用傅里叶变换的色散效果,使得系统简化并能够实现实时处理的性能。从光栅公式入手,对系统的量程和空间分辨率进行了初步分析,并通过系统实验将上述理论结果进行验证。实验表明,本文系统能够将一维的条形码以20.9 MHz的帧率在示波器上实时成像,比目前的常用成像技术高4个量级。Traditional imaging technologies can neither capture ultrafast processes nor get high sensitivity in their imagirlg processes. This paper aims to build an ultrafast one-dimensional real-time imaging sys- tem which is based on the optical mapping and boardening technology. By the use of optical image ampli- fication, we realize the system with both ultrafast continuous real-time imaging and high sensitivity. This system makes full use of the dispersive Fourier transform in order to simplify the construction of the system and realize the real-time image processing, while the system is based on the space-frequency map- ping of the spatial grating and the frequency-time mapping of the dispersive fiber. Besides, this paper dis- cusses not only the system measuring range but also the spatial resolution from both the grating formula and the features of the gratings and other components of the system. We get some ideal experimental re- sults to verify the system performance. As a result,we get real-time imaging at a frame rate of 20. 9 MHz,which is 4 orders of magnitude higher than that of the traditional imaging system. Our system measuring range is about 7.0 ram,while the spatial resolution can reach as low as 280.
关 键 词:连续时间编码放大显微技术(STEAM) 空-频映射 频时映射
分 类 号:TN29[电子电信—物理电子学]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:18.191.86.218