检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:彭航宇[1] 张俊[1] 付喜宏[1] 曹军胜[1] 王彪[1]
机构地区:[1]中国科学院长春光学精密机械与物理研究所发光学及应用国家重点实验室,吉林长春130033
出 处:《中国激光》2013年第7期78-82,共5页Chinese Journal of Lasers
基 金:国家863计划(2012AA040210);科技部重大仪器专项(2011YQ04007702);吉林省科技厅发展计划(20112106;20115025;20116011)
摘 要:利用包含透射光栅的外腔反馈结构,使半导体激光器阵列中各发光单元工作波长不相同,实现了各发光单元激射波长的啁啾。通过外腔镜使各个发光单元出射光束重叠及方向一致,实现半导体激光器阵列的光谱合束,从而提高半导体激光器的光束质量。采用前腔面镀有增透膜的激光器阵列实现功率为52.2 W的连续波激光输出,电-光转换效率达到47.9%,光谱线宽为15.17nm。整个阵列输出光束的光参量积达到3.7mm·mrad,与阵列中单个发光单元的光束质量基本一致。The spectral beam combining with an array of high-power and high-efficiency diode lasers is reported by using a common external cavity which contains a transmission grating, while simultaneously forces each element to operate at different, but controlled wavelengths and forces the beams from all the elements to overlap and propagate in the same direction. Using the diode laser array with front-mirror surfaces coating with high transmittance films, a continuous-wave laser with output power of 52.2 W and electro-optical conversion efficiency of 47.9% is achieved. The spectral linewidth is about 15.17 nm. Beam parameter product (BBP) is 3.7 mm·mrad, which is the same as that of single element of the array.
分 类 号:TN248.4[电子电信—物理电子学]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:18.118.195.19