基于压电陶瓷的光相位调制器的调制系数测量及验证  

Measurement and Verification of the Modulation Coefficient of the Optical Phase Modulator Based on Piezoelectric

作　　者：刘志波[1,2] 李阳[1,2] 苏耘[1,2] 刘艳[1,2] 谭中伟[1,2] 马林[1,2] 简水生[1,2] 

机构地区：[1]北京交通大学全光网络与现代通信网教育部重点实验室,北京100044 [2]北京交通大学光波技术研究所,北京100044

出　　处：《光学学报》2013年第7期76-81,共6页Acta Optica Sinica

基　　金：国家自然科学基金(61177012);中央高校基本科研业务费(2012YJS009)

摘　　要：实现了一种快速简单有效的测量基于压电陶瓷(PZT)的光相位调制器相位调制系数的方法。利用光纤马赫-曾德尔(M-Z)干涉仪输出光强度与两臂相位差的函数关系,通过3×3解调算法可以计算基于PZT的光相位调制器的相位调制系数。实验中在M-Z干涉仪另一臂加上一个基于PZT的相位调制器以减小系统噪声的影响,并在相位生成载波(PGC)解调实验中作为干扰源。最后通过PGC解调方案解调出了3×3耦合器的第一路输出信号中的干扰信号,实验验证了所测量的结果,表明该方法是行之有效的。A new method is proposed to measure the modulation coefficient of the optical phase modulator based on piezoelectric ceramic （PZT）. The modulation coefficient of the optical phase modulator based on PZT can be calculated by 3 × 3 demodulation algorithm, which utilizes the functional relationship between the output optical intensity and the phase difference between the two arms of the Mach-Zehnder （M-Z） interferometer. A second phase modulator is placed on another arm of the M-Z interferometer to decrease the influence of the system noise, and used as the interference source for the next experiment. We finally use the phase generated carrier （PGC） algorithm to demodulate an interfered signal of the M-Z interferometer to test the result. The whole scheme is successfully demonstrated both by numerical simulation and experimental results.

关 键 词：测量 光相位调制器 马赫-曾德尔干涉仪 3×3解调 

分 类 号：TN29[电子电信—物理电子学]