基于人机工程分析的手持式电磁铆枪旋转托架设计  

Design of the Spining Bracket with Electromagnetic Riveter based on Ergonomic Analysis

作　　者：张喆[1] 曹增强[1] 陈琦[1] 

机构地区：[1]西北工业大学机电学院,陕西西安710072

出　　处：《机械设计与制造》2013年第3期33-34,37,共3页Machinery Design & Manufacture

基　　金：航空科学基金资助项目(2009ZE53053)

摘　　要：分析了传统悬挂铆枪的托架只适用于平板状结构产品铆接等问题。为解决此问题,在龙门式托架的基础上提出了新型旋转托架,进行了结构设计并分析了其运动特点,建立了基于CATIA的三维零件模型,进行了虚拟装配,并基于DELMIA分析了托架人机工程的近身作业空间,进行旋转托架的碰撞干涉检查,验证了其初始的设计参数。结果表明旋转托架满足了设计要求,并且可以实现圆弧形结构产品的铆接,基于人机工程的设计方法缩短了开发周期,降低了设计成本。It analyzed the existing problem of the traditional gantry bracket with electromagnetic riveter which only can be used for plate-shaped product.For the purpose of solving the existing problem,a new spining bracket was introduced based on the gantry bracket.Structure design and the analysis of the kinetic characteristic was completed.The 3D modeling of the mechanical parts and the virtual assembly simulation was finished based on CATIA.Through the ergonomic analysis of DELMIA,it analyzed the operation space and verified the design parameters as well as the simulation of collision interference was done.The results indicate that the spining bracket can meet the design requirements and solve the riveting problem of the arc-shaped product.

关 键 词：人机工程 DELMIA 作业空间 

分 类 号：TH16[机械工程—机械制造及自动化] V262.411[航空宇航科学与技术—航空宇航制造工程]