指数率非牛顿水基磁流体热弹流润滑分析  

Thermal Elastohydrodynamic Lubrication Analysis of the Power Law Non-Newtonian Water-Based Ferrofluid

作　　者：史修江[1] 王优强[1] 

机构地区：[1]青岛理工大学机械工程学院,山东青岛266033

出　　处：《机械设计与制造》2013年第5期149-152,共4页Machinery Design & Manufacture

基　　金：国家自然科学基金资助项目(51175275);青岛科技计划资助项目(12-1-4-4-(2)-JCH)

摘　　要：利用考虑热、磁场和非牛顿效应的雷诺方程,并且采用多重网格法和多重网格积分法,对指数率非牛顿水基磁流体滑动轴承进行热弹流润滑分析。探讨了非牛顿流体指数、磁场强度、滑滚比和曲率半径对水基磁流体弹流润滑膜膜厚和压力的影响。结果表明:在水基磁流体润滑的条件下,水基磁流体润滑膜厚随着指数的增加而减小,压力随着指数的增加的变化不明显;随着磁场强度和滑动轴承滑滚比的增大,水基磁流体润滑膜的膜厚增大,压力无明显变化;随着滑动轴承曲率半径的增大,水基磁流体润滑膜的膜厚减小,入口区压力增大,压力峰减小。Based on the Reynolds equation considering the temperature and the effection of non-newtonian,and the multi-grid method and multiple grid integration method were adopted,the elastohydrodynamic lubrication numerical analysis of the power law non-newtonian water-based ferrofluid were carried out.The influence of non-newtonian index,the magnetic induction,the slide-roll ratio and radii of curvature on water-based ferrofluid film thickness and pressure was studied.The results show that the the film thickness of water-based ferrofluid are decreased with increase of the index and radii of curvature,but the film thickness is increased with increase of the magnetic induction and slide-roll ratio;The pressure does not show a clear change with increase of index,slide-roll ratio and magnetic induction;but the pressure at inlet region is increased with the increase of radii of curvature,the pressure peak is decreased with the increase of radii of curvature.

关 键 词：水基磁流体 弹流润滑 非牛顿流体 磁场强度 滑滚比 曲率半径 

分 类 号：TH16[机械工程—机械制造及自动化]