交错并联正激逆变器研究  

Study on an interleaving double forward inverter

作　　者：公岷[1] 张小平[2] 刘志勇[3] 

机构地区：[1]西南民族大学电气信息工程学院,四川成都610041 [2]攀枝花学院电气信息工程学院,四川攀枝花617000 [3]中国民用航空飞行学院科研基地,四川广汉618307

出　　处：《电焊机》2013年第7期61-63,79,共4页Electric Welding Machine

基　　金：中央高校基本科研业务费专项资助项目(11NZYBS01);国家外国专家局"2012年度外国文教专家项目"资助项目(xnmzdx2012-7)

摘　　要：在焊接系统中,为了提高焊接系统输出电压和电流的波形质量,针对单端正激逆变器存在的不足,采用两个单端正激逆变电源并联,即交错串并联逆变焊接电源。该电源脉冲电流频率是单端正激脉冲电流频率的一倍,可达到100 kHz,后接平波电感,这样焊接电流纹波小。两个单端正激逆变器都采用平特性,用于等速送丝熔化极脉冲弧焊时,电弧稳定,使用和调节方便。通过仿真和实验验证了该电路拓扑结构和控制方法的可行性。In welding systems, in order to improve the output voltage and current waveform quality ,this paper aims at the deficiencies of interleaving single forward inverter,using two single-ended forward power inverters in parallel, staggered both series and parallel inverter welding power source. The power pulse current frequency is single-ended forward pulse current frequency doubled to reach 100 kHz pulsd current,followed by smoothing inductance,so the welding current ripple. Two single-ended forward inverter level characteristics are used for constant wire feed MIG pulsed arc welding,arc stability,operation,and easy to adjust. In the end of the simulation and experimental validation of the circuit topology and control method is feasible.

关 键 词：交错控制 并联逆变器 LC滤波 

分 类 号：TG434.1[金属学及工艺—焊接]