液压支柱表面镍基自熔合金TIG修复研究  

Nickel based self fluxing alloy on hydraulic prop surface by TIG cladding

作　　者：张勇[1] 姜海峰[1] 代显富[1] 安婷婷[1] 

机构地区：[1]辽宁工程技术大学材料科学与工程学院,辽宁阜新123000

出　　处：《兵器材料科学与工程》2013年第4期56-59,共4页Ordnance Material Science and Engineering

摘　　要：为提高液压支柱在复杂工况下的工作寿命,以水玻璃为黏结剂在液压支柱基体27SiMn上涂覆镍基自熔合金粉末,采用手工钨极氩弧焊进行熔修。利用金相显微镜观察熔覆层表面和横截面的组织,进行熔敷金属的硬度、耐磨性实验,测试了基体与熔覆层的耐蚀性能。结果表明:熔覆金属的显微组织和力学特性随着熔覆电流的变化而改变,耐磨性在熔覆电流为70 A时为最优,熔覆层较基体的耐蚀性有显著提高。In order to improve the service life of hydraulic prop in complex conditions,TIG was utilized to weld nickel？based alloy powder on the hydraulic prop made from 27SiMn,the powder was glued by sodium silicate. The microstructures of cladding layer and cross section were studied,and hardness and abrasion resistance were tested. Meanwhile,the difference of corrosion resistance between base metal and cladding layer was analyzed. The experiment results show that wear resistance is optimum when welding current is 70 A,corrosion resistance can be improved by TIG cladding.

关 键 词：镍基自熔合金 TIG 耐磨性 液压支柱 

分 类 号：TG455[金属学及工艺—焊接]