检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:蒋喜志[1] 贾雪[1] 陈曰东 吕学建 贾丽霞[1] 李建国[1] 王宝瑞[1] 任昆[1]
机构地区:[1]哈尔滨玻璃钢研究院,哈尔滨150036 [2]二炮驻哈尔滨地区军代表室,哈尔滨150000
出 处:《纤维复合材料》2013年第2期39-42,共4页Fiber Composites
摘 要:研制了一种耐低温耐腐蚀树脂基复合材料,记为S2/EpD。S2/EpD复合材料采用自制环氧配方,以高强玻璃纤维(S2)为增强材料,通过湿法纤维缠绕成型制作复合材料单向板。S2/EpD单向板在-40℃的两种氟碳化合物(Fa、Fb)里分别浸泡1 000 h后,其单向板复合材料层间剪切强度及复合材料外观无显著变化。S2/EpD复合材料单向板在Fa、Fb氟碳化合物里浸泡1 000 h后,层间剪切强度保持率分别为92.5%和92.8%。A type of resin matrix composite of cryogenic and corrosion resistance (called S2/EpD) was studied in this paper. S2/EpD, which consists of self - made epoxy and high - strength glass fibers, is made as the unidirectional plates by the wet filament winding process. After S2/EpD unidirectional plates were soaked in the two fluorocarbons ( denoted by Fa and Fb) under -40℃ for 1 000 hours, the interfacial shear strength and the appearance of the plates has no significant changes. After S2/EpD unidirectional plates were soaked for 1 000 hours, the retention rate of the interfacial shear strength is 92.5% and 92.8%, respectively.
关 键 词:耐低温耐腐蚀树脂基复合材料 氟碳化合物(Fa Fb) 低温浸泡 耐低温腐蚀性能
分 类 号:TB332[一般工业技术—材料科学与工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.229