基于Labview的生物组织水分含量变化检测系统  

Moisture Content Measurement System for Radio-Frequency Induced Tissue Fusion Based on Labview

作　　者：陈晟达[1] 周宇[1] 赵灵犀[1] 马锬[1] 王成[1] 宋成利[1] 

机构地区：[1]上海理工大学医疗器械与食品学院,上海200093

出　　处：《计算机测量与控制》2013年第7期1783-1785,1788,共4页Computer Measurement &Control

基　　金：上海市科委资助项目(10441900900);上海市教委科研创新项目(12YZ102);上海市优秀青年教师科研专项基金(slgl0020)

摘　　要：目前手术中使用的射频闭合装置存在反馈控制方式单一,响应滞后的缺点,为此设计一套基于Labview的生物组织水分含量变化检测系统;该系统利用发光二极管产生的近红外光照射生物组织,一部分光被组织中的水分吸收,透射光用光电检测电路采集并转化为电压信号,经过调理处理输送到DAQ数据采集卡,利用Labview编程检测、显示并储存信号,将水分含量的差异通过检测电压表征;实验结果表明此系统操作方便,工作稳定,能够准确迅速的检测透射的光通量,并反映闭合过程中的组织水分含量变化,可以作为研制新型射频能量闭合装置中反馈控制系统的基础。Radio frequency fusion equipment used in surgery has drawbacks such as single method of feedback control and response lag currently, for this, the research develop a system based on Labview to measure water content of biological tissue. The biological tissue is ex- posed to near infrared light which is induced by near infrared light emitting diode, a part of the light has been absorbed by water of tissue and the transmission light is acquired and transformed to voltage signal by photoelectric detector filtering circuit. The signal is transmitted to data acquisition card after be processed, and be measured, displayed and stored by Labview program which shows the difference of water content. The result shows the system which is easy for operation and working stably is able to measure water content accurately. It is a foundation to develop a new feed--back controlled system for radio--frequency tissue fusion device.

关 键 词：射频能量 含水量 吸收峰 光学检测 LABVIEW 

分 类 号：TP303[自动化与计算机技术—计算机系统结构]