复合电磁场对连铸结晶器弯月面金属液运动行为及铸坯质量的影响  

Effect of Multi Electromagnetic Field on Motion State at Meniscus and Quality of Continuous Casting Metals

作　　者：张志峰[1] 李廷举[1] 温斌[1] 金俊泽[1] 

机构地区：[1]大连理工大学铸造工程研究中心,辽宁大连116023

出　　处：《钢铁研究学报》2000年第B09期36-40,共5页Journal of Iron and Steel Research

基　　金：国家自然科学基金资助项目!(5 96 740 33) ;重大项目基金资助项目!(5 9995 442 ) ;国家重大基础研究基金资助项目!(G19980 6 15 0 0

摘　　要：为了获得高质量的连铸坯 ,提出了在连铸结晶器外施加复合电磁场的电磁铸造方法。规范和测定了冷坩埚式铜铸型内复合电磁场的分布 ;采用低熔点金属镓和 Sn- 4.5 % Pb合金模拟高熔点钢 ,研究了在水冷铜铸型外施加复合电磁场对结晶器弯月面处金属液运动行为及铸坯质量的影响。实验结果表明 :复合电磁场能够有效地抑制结晶器弯月面处金属液波动变形 ,并改善铸坯的表面质量。随着搅拌线圈磁通密度的增加 ,铸坯的凝固组织由柱状晶转变为等轴晶 。In order to obtain high quality casting metal, a new casting process, i.e . imposing simultaneously high frequency and main frequency magnetic field (in the following, the two types of the magnetic field are abbreviated as the multi electromagnetic field) from the outside of a mold was developed. To demonstrate the validity of the process, the meniscus behavior was investigated by using molten gallium as a simulator of molten steel. The effect of multi electromagnetic fields on the improvement of billet quality was different when with Sn 4.5 % Pb alloy was used as another simulator of molten steel. The experimental results showed that multi electromagnetic field can control the meniscus disturbance generated by electromagnetic stirring and eliminates surface defects of casting metal, and the solidifcation structure of casting metal was fined with magnetic flux density of stirring coil increasing.

关 键 词：复合电磁场 弯月面皮动 表面质量 连铸 结晶器 

分 类 号：TF77[冶金工程—钢铁冶金]