电絮凝-膜过滤技术处理含铜废水的研究  

STUDY ON TREATING WASTEWATER CONTAINING COPPER BY ELECTROCOAGULATION-MEMBRANE FILTRATION TECHNOLOGY

作　　者：李富华[1] 吕文英[1] 刘国光[1] 姚琨[1] 林亲铁[1] 黄浩平[1] 康亚璞[1] 

机构地区：[1]广东工业大学环境科学与工程学院,广州510006

出　　处：《环境工程》2013年第4期32-34,共3页Environmental Engineering

基　　金：国家水体污染控制与治理科技重大专项(2009ZX07211-005-03);精细化工废水脱毒减排与深度处理回用技术研究与工程示范

摘　　要：为了有效控制重金属废水对环境的污染,采用电絮凝-膜过滤技术处理含铜废水,考察了进水pH、电极电流密度和水流量对铜去除率的影响。结果表明:该技术的最佳进水pH值为5.8,电极电流密度为10 A/m2,水流量为2 L/min。在此条件下,对不同浓度的含铜废水进行处理,铜去除率均在95%以上,最高可达99.02%。由此可见,电絮凝-膜过滤技术对含铜废水具有良好的处理效果。To control the pollution of heavy metal ionic wastewater to the environment effectively,combination technique has been a growing trend in recent years.This paper examines the influences of inflow pH,electrode current density and flow rate on removal rate of copper during the electrocoagulation-membrane filtration processing of copper containing wastewater.The results show that the optimal value of inflow pH is 5.8,the electrode current density is 10 A/m2 and the flow rate is 2 L/min.To process the copper containing wastewater of different concentrations on such conditions,the removal rate of copper is over 95% on average and can be up to 99.02%.This proves the good effect of electrocoagulation-membrane filtration technology to treat wastewater containing copper.

关 键 词：含铜废水 电絮凝 膜过滤 组合技术 水处理 

分 类 号：X703[环境科学与工程—环境工程]