两柱掩护式大采高强力放顶煤液压支架的研制  

Development of Two-legs Shield Powerful Caving Coal Hydraulic Support for Large Mining Height Face

作　　者：马端志[1] 王恩鹏[1] 

机构地区：[1]天地科技股份有限公司开采设计事业部,北京100013

出　　处：《煤炭科学技术》2013年第8期84-86,91,共4页Coal Science and Technology

基　　金：国家高技术研究发展计划(863计划)资助项目(2012AA06A407)

摘　　要：根据两柱掩护式放顶煤液压支架的使用情况,分析了增强两柱掩护式放顶煤液压支架支护能力的必要性和增大放顶煤支架高度的意义,针对双山和神树畔煤矿条件设计了ZFY17000/27/50D型两柱掩护式大采高强力放顶煤液压支架,介绍了其主要技术参数,研究了支架在4.5 m高度时外载作用位置与支护性能的关系,结果表明:外载合力作用位置在立柱工作区时,该液压支架支护性能可得到充分发挥,当开采高度为4.5 m时,立柱工作区范围为距顶梁后端1 576～1 804 mm。According to application of two-legs shield caving mining support, the necessary to strengthen its support capacity and significance to raise support height were analyzed.ZFY17000/27/50D two-legs shield powerful caving mining support for large mining height face were designed for Shuangshan and Shenshupan coal mines, and the major technical parameters were introduced.The relationship between external load position and supporting performance at 4.5 m supporting height were studied.The results showed that the caving mining support owned excellent support performance while the resultant force acting upon the working area of legs, and the working range of legs was 1 576- 1 804 mm distance from the back end of canopy.

关 键 词：放顶煤液压支架 两柱掩护式 支护性能 立柱工作区 

分 类 号：TD35[矿业工程—矿井建设]