CAD／CAE软件在注射模设计中的应用  

The application of CAD/CAE injection software in the design of mould

作　　者：张晓陆[1] 

机构地区：[1]江苏春兰机械制造有限公司,江苏泰州225300

出　　处：《模具工程》2013年第8期54-57,共4页Mould &Die Project

摘　　要：本文以卡盒、支架、卡盖模具为例说细阐述了两板式侧浇口注射模具的结构设计要点及工作过程，在结合自己多年实践经验的基础上通过采用MPI软件进行流动分析，最后得出了一道合理而实用的流道系统方案，使得模具的缺陷大大降低，进而提高了塑件的内在质量和改善其工作性能。With the card box, bracket and card cover mould as an example, the main design point and working process of the edge gate injection mould of two plates are stated in detail .Last 1 educe a sort of reasonable runner system project by MPI software based on my practice experience .It reduces the disfigurement of the die, improves the plastic＇ s inherent quality and ameliorates the work capability of left-right bracket.

关 键 词：设计 侧浇口 填充 CAD CAE 

分 类 号：TQ320.52[化学工程—合成树脂塑料工业]