涤粘混纺牙签条织物生产难点及解决措施  

Production Difficulties and Solutions of Polyester Viscose Blended Toothpick-liked Fabric

作　　者：种新琪 张生辉[2] 

机构地区：[1]陕西彩橙高新染整工贸有限责任公司 [2]陕西省纺织科学研究所

出　　处：《棉纺织技术》2013年第9期58-61,共4页Cotton Textile Technology

摘　　要：分析涤粘混纺牙签条织物生产难点及解决措施。以在JAT-610型喷气织机上生产T/R 70/3011.8×2/19.7 480/381.5 175.3涤粘混纺牙签条织物为例,介绍了织物规格、原纱条件及上机工艺。分析了生产中经纱错位、边纱断裂、纬缩扭结等问题,针对性地提出了相关的解决方法,如采取反织法,调整后梁、织机开口和经纱张力。通过优化织造工艺,最终使织机效率达到90%以上,织疵率也降低较多。Production difficulties and solutions of polyester viscose blended toothpick-liked fabric were analyzed. Taking T/R 70/30 11.8x2/19.7 480/381.5 175.3 polyester viscose blended toothpick-liked fabric produced on JAT- 610 air jet loom as example, fabric specification, yarn quality and loom processing were introduced. Problems in produc- tion were analyzed such as warp dislocation, side yam breakage and weft kinky, the related solutions were put forward, such as adopting anti-woven, adjusting back beam, shed and warp tension. Through optimizing weaving processing, finally loom efficiency can he reached above 90% ,woven defect can be reduced greatly.

关 键 词：经二重组织 牙签条织物 喷气织机 织疵率 边撑 开口时间 

分 类 号：TS103.33[轻工技术与工程—纺织工程]