中国先进研究堆中子织构谱仪实验软件设计  

Experimental Software Design of Neutron Texture Diffractometer at China Advanced Research Reactor

作　　者：刘晓龙[1] 陈东风[1] 李眉娟[1] 田庚方[1] 吴立齐[1] 刘蕴韬[1] 

机构地区：[1]中国原子能科学研究院核物理研究所,北京102413

出　　处：《原子能科学技术》2013年第8期1434-1438,共5页Atomic Energy Science and Technology

基　　金：973计划资助项目(2010CB833101);国家自然科学基金资助项目(11105231);核能开发项目资助(HK.WL1001)

摘　　要：本工作设计开发了中国先进研究堆(CARR)中子织构谱仪的实验软件。基于中子衍射法测量织构的基本原理及谱仪的运动控制和数据采集系统,提出织构测量所需的功能,详细描述了各功能的流程设计,最终使用Python语言在Linux系统下编写了各功能的程序模块,完成了CARR中子织构谱仪实验软件的开发。The experimental software of the neutron texture diffractometer at China Advanced Research Reactor （CARR） was designed. Based on the principle of texture measurement by neutron diffraction and the motion control and data acquisition system of the diffractometer, the functions needed for texture measurement were proposed. Then the flow charts of these functions were described in detail and realized by Python language in Linux system. The experimental software for CARR neutron texture diffractometer has been successfully accomplished.

关 键 词：中子衍射 织构谱仪 实验软件 极图 

分 类 号：O571.56[理学—粒子物理与原子核物理]