检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:陈安亮[1] 马双营[1] 曹越[1] 陈永明[1] 周晓东[1] 王同华[1]
机构地区:[1]大连理工大学化工学院精细化工国家重点实验室炭素材料研究室膜科学与技术研究开发中心,辽宁大连116024
出 处:《高校化学工程学报》2013年第4期579-584,共6页Journal of Chemical Engineering of Chinese Universities
基 金:国家自然科学基金面上与重点项目(20776024,20976021,20836006,21176036);国家863项目(2009AA03Z215,2012AA03A611)
摘 要:以商业化的Kapton型聚酰亚胺为前驱体制备炭膜,采用容量法研究了不同炭化温度制备的炭膜CO2吸附和扩散行为,并利用Sips模型对实验数据进行拟合,DA方程计算炭膜的孔结构参数,Fick扩散模型求取CO2在炭膜内的扩散系数,采用XRD分析探讨了炭膜的炭结构。结果表明,炭膜孔结构随着热解炭化温度的提高,孔径收缩,且当炭化温度从600℃升高到800℃,炭膜的微孔体积随炭化温度的升高而增大,而800℃以后,微孔体积随炭化温度的升高而下降。CO2在不同炭膜中的扩散系数约为1.04×10-13~8.56×10-12m2·s-1,在实验测定的压力范围内扩散系数随着平衡压力的增大呈现出先增大后减小的规律。Carbon membranes were prepared from the precursor of Kapton-type polyimide under different carbonization temperatures.The CO2adsorption and diffusion performance of the prepared carbon membrane were measured by means of volumetric method,where the adsorption data obtained were fitted by Sips model and the pore structure parameters of carbon membranes were calculated by DA equation.Fick diffusion model was used to calculate the CO2 diffusion coefficients in carbon membrane.Results indicate that the pore structures of carbon membranes are affected by the carbonization temperature.The pore sizes of carbon membrane are reduced as the carbonization temperature rises.The pore volume of carbon membrane is enlarged with the increase of carbonization temperature from 600 to 800℃ and decreased when the temperature is higher than 800℃.The CO2diffusion coefficients in the carbon membranes prepared at different carbonization temperatures are from 1.04×10-13m2·s-1 to 8.56×10-12 m2·s-1.Within the given pressure range in this work,the diffusion coefficient increases at first and then decreases as the equilibrium pressure rises.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.44