铝合金表面缓蚀自修复疏水性膜层的制备与表征  

PREPARATION AND CHARACTERIZATION OF ANTI-CORROSION SELF-HEALING AND HYDROPHOBIC COATING ON ALUMINUM ALLOY

作　　者：潘晓铭[1] 吴俊升[1] 肖葵[1] 高书君[1] 裴礼鸿[1] 田然[1] 李晓刚[1] 

机构地区：[1]北京科技大学腐蚀与防护中心,北京100083

出　　处：《金属学报》2013年第9期1113-1120,共8页Acta Metallurgica Sinica

基　　金：国家自然科学基金项目50701006;51271031;中央高校基本科研业务费专项资金项目FRF-SD-12-027A资助~~

摘　　要：以正辛基三乙氧基硅烷(TEOCS)和正硅酸乙酯(TEOS)作为前驱体,采用溶胶-凝胶法在铝合金表面制备一种硅烷改性膜层,并研究掺杂不同含量铈盐CeNO33·6H2O对膜层性能的影响.通过原子力显微镜、接触角测试、电化学阻抗谱和扫描电化学显微镜对掺杂前后膜层的表面形貌、润湿性、耐腐蚀性和自修复性能进行了表征.结果表明,当掺杂铈盐的含量为0.005 mol/L时,膜层具有较少的缺陷、较好的疏水性以及良好的耐蚀自修复性.Aluminum alloy has been widely used as the basic material in many industries because of its low density and high strength to weight ratio. Poor resistance to corrosion, however, limits the variety of practical applications of aluminum alloy. Traditionally, this problem was faced with the use of chromate conversion coatings which result in effective corrosion protection because of the self-healing property. However, the presence of toxic hexavalent chromium compounds makes those coatings very hazardous to the environment. Consequently, it is necessary to develop new environmentally compliant, chromate （VI）-free alternatives. Recently, sol gel technology provides a new promising approach to prepare protective coatings on aluminum alloy. It has many advantages, such as the simple operation and environmental protection, etc. In this work, an Ormosil coating was developed on aluminum alloy through the sol-gel method using triethoxyoctylsilane （TEOCS） and tetraethylorthosilicate （TEOS） as the precursors. The sol-gel coatings were deposited by dip-coating method on aluminum alloy sub- strate. The sol-gel coatings doped with different concentrations of cerium salt （Ce（NO3）3.6H20） were investigated. Surface morphology, wettability, anti-corrosion and self-healing of the sol-gel coatings non-doped and doped cerium salt were characterized by using atomic force microscopy, contact angle measurements, electrochemical impedance spectroscopy and scanning electrochemical microscopy. The hydrophobic of the coatings was evaluated by means of contact angle measurements. The corrosion resistance of the coatings was investigated by means of electrochemical impedance spectroscopy mea- surements, and the anti-corrosion, selLhealing properties were discussed based on equivalent circuit fitting. The corrosion behavior of the damaged sol-gel coatings was studied by scanning electrochemi- cal microscopy. The results indicated that it had a marked effect on the surface morphology, corrosion resistance and hydrophobicity

关 键 词：铝合金 溶胶-凝胶 铈盐 耐腐蚀 自修复 疏水性 

分 类 号：TG174.4[金属学及工艺—金属表面处理]