基于Pro/E和ANSYS Workbench的悬挂夹具结构优化设计  

Structural Optimization Design of Hanging Clamp Based on Pro/E and ANSYS Workbench

作　　者：李诚[1] 

机构地区：[1]重庆工程职业技术学院,重庆400037

出　　处：《机械工程师》2013年第9期107-109,共3页Mechanical Engineer

摘　　要：悬挂夹具是某侧送机构的关键部件,主要承受压力和转矩作用,且工作条件洁净度要求高,因此对它的结构可靠性和材料提出了较高的要求。为此,利用现代设计方法和手段,实现悬挂夹具从Pro/E到ANSYS Workbench的无损导入,并在此基础上简要说明ANSYS Workbench分析悬挂夹具的整个流程,为进一步进行悬挂夹具的有限元分析、优化设计研究奠定基础。Hanging clamp is the pivotal component of a side-carry machine. Because it endure pressures and torque, so upper request of its reliability and material is put forward. By using modern design method, the guide of hanging clamp is imported from Pro/E to ANSYS Workbench. The whole flow of analyzing the hanging clamp is introduced, which can provide reference for further research on the finite element analysis and optimization of hanging clamp.

关 键 词：悬挂夹具 有限元分析 PRO E ANSYS WORKBENCH 优化设计 

分 类 号：TH122[机械工程—机械设计及理论]