基于ABAQUS隐式分析的梁单元材料模型开发应用  

Development and application of material constitutive models based on ABAQUS/Standard beam elements

作　　者：雷拓[1] 刘伯权[1] 刘锋 

机构地区：[1]长安大学建筑工程学院,陕西西安710061 [2]山东科技大学土木建筑学院,山东青岛266510

出　　处：《中南大学学报（自然科学版）》2013年第8期3503-3511,共9页Journal of Central South University:Science and Technology

基　　金：国家自然科学基金资助项目(51078037);教育部高校博士点基金资助项目(20100205110010);中国博士后科学基金面上项目(2012M511957)

摘　　要：为将ABAQUS梁单元用于钢筋混凝土构件的模拟,根据已有研究,分别定义钢筋、混凝土的本构模型;按照程序提供的UMAT接口格式,采用FORTRAN语言编制纤维模型梁单元的钢筋、混凝土材料用户子程序。讨论ABAQUS中钢筋混凝土梁单元有限元模型的建模方法。通过与拟静力试验及足尺振动台试验结果比较,验证程序及建模方法的可靠性。研究结果表明:所编制的材料子程序能较好地反映任意反复荷载下钢筋混凝土柱的强度及刚度退化现象,广泛适用于复杂结构中弯曲破坏为特征的普通及高强混凝土梁、柱等构件的精细化模拟。In order to use the beam element of ABAQUS for analyzing reinforced concrete members, a steel rebar and concrete constitutive models were presented based on the former research. According to UMAT interface provided by the software, a user subroutine of steel rebar and concrete written in FORTRAN language was developed for fiber beam element. Moreover, modeling methods of reinforced concrete beam element by ABAQUS were discussed at length. By means of comparison with low cycle and iterative static test and full scale shaking table test results, reliabilities of the user subroutine and modeling methods were validated. The results show that the subroutine provided here can well reflect strength and stiffness degradation of reinforced concrete colunms produced by arbitrarily cyclic loading both in tension and compression. The subroutine is widely applicable to refined simulation of normal- and high-strength concrete beams and columns or other members characterized by flexural failure in complex large-scale structures widely.

关 键 词：钢筋混凝土 本构模型 UMAT 梁单元 试验验证 

分 类 号：TU375[建筑科学—结构工程]