检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]华南理工大学电子与信息学院,广东广州510640
出 处:《华中科技大学学报(自然科学版)》2013年第8期24-29,共6页Journal of Huazhong University of Science and Technology(Natural Science Edition)
基 金:国家高技术研究发展计划资助项目(2009AA01Z260)
摘 要:提出一种应用于14bit100MS/s流水线模数转换器(ADC)的数字后台校准算法.该算法利用伪随机信号(PN)随机改变子ADC中比较器的阈值电压,间接注入宽度大幅度抖动信号测量ADC电路中由于电容失配和放大器有限增益造成的误差,并在数字域内对这些误差进行补偿.该方法能有效减小因电容失配和放大器有限增益等非理想因素对流水线ADC性能的影响,改善ADC的动态性能.该算法实现过程中无须增加采样电容和比较器数目,校准运算时无须复杂计算,实现简单,应用灵活.仿真结果表明:采用该技术校准后,流水线ADC的信号噪声失真比从63.3dB提高到78.7dB,无杂散动态范围从65.5dB提高到93.3dB.A digital backstage calibration technique for a 14 bit 100 MS/s pipelined ADC (analog-to-digital converter) was proposed, which changed the threshold levels of sub analog-to-digital converters (ADCs) according to a pseudo-random noise (PN) pulse sequence. A large magnitude wideband dithers were injected into the ADC and measures the nonlinearity errors resulting from finite gain and capacitor mismatch in multiplying digital-to-analog converter (MDAC) were measured, which were fed back to the digital outputs of pipelined ADC for correction. This calibration method can efficiently suppress the impact caused by the capacitor mismatch and finite opamp gain errors without adding extra number of sampling capacitors and comparators, and is easy to realize without complex mathematic operation. Simulation results show that using the proposed calibration technique, the signal-to-noise-and-distortion ratio is increased from 63.3 dB to 78.7 dB and the spurious-free dynamic range (SFDR) improves from 65.5 dB to 93.3 dB.
关 键 词:流水线模数转换器(ADC) 比较器抖动 数字后台校准 电容失配 放大器有限增益
分 类 号:TN47[电子电信—微电子学与固体电子学]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.200