检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:TAN XiaoMing ZHANG JingZhou LIU Bo ZHU XingDan
出 处:《Science China(Technological Sciences)》2013年第10期2456-2464,共9页中国科学(技术科学英文版)
基 金:supported by the National Natural Science Foundation of China(Grant No.51076063)
摘 要:The heat transfer performance of a mist/air jet impingement on a constant-heat flux surface was experimentally investigated.Two objectives were outlined in the current study.The first objective is to assess the effects of mist/air volumetric flow rate ratio,impinging mode and heat flux on the heat transfer characteristics of free mist/air jet impingement.The second objective is to assess the effect of swirl flow induced by the spinning grinding wheel on the mist/air jet impingement,simulating the heat transfer process on a grinding work-piece surface subjected to the mist/air jet impingement.The results show that the addition of dilute water droplets to air flow results in significant heat transfer enhancement.Once the mist/air ratio is increased to a certain value,the increase of heat transfer with the mist/air ratio becomes slow.For a given mist/air ratio,as the increase of heat flux,the contribution of droplet evaporation to the overall heat transfer is weakened relatively,resulting in a decrease of heat transfer enhancement in comparison to the lower heat flux case.The heat transfer coefficient in the stagnation region for the oblique jet is much lower than the normal mist/air jet impingement,while in the region away from the stagnation,the local heat transfer coefficient for the oblique jet is higher than the normal jet.As regards as the mist/air jet impingement in the vicinity of grinding zone is concerned,when the jet impinging direction is consistent with the rotating direction of rotating disk,the swirl flow induced by the rotating disk could entrain more droplets to enter the jet impinging stagnation zone,which is beneficial to convective heat transfer enhancement.Furthermore,as the rotational speed of disk increases,the temperature deceases in impinging jet stagnation zone.
关 键 词:impinging jet mist/air impinging jet enhanced heat transfer grinding zone cooling
分 类 号:TK124[动力工程及工程热物理—工程热物理] O358[动力工程及工程热物理—热能工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.249