交流电磁场检测信号的影响因素与裂纹的识别判定  

Influencing Factors of the Signal for ACFM and Recognition Determination of Cracks

作　　者：陈勇[1] 潘东民[1] 邓平[1] 张大伟[1] 栾涛[1] 刘凯[1] 

机构地区：[1]海洋石油工程股份有限公司,天津300451

出　　处：《无损检测》2013年第9期61-65,共5页Nondestructive Testing

基　　金：国家"863"计划资助项目(2008AA092701)

摘　　要：为了提高交流电磁场检测ACFM信号识别判定的准确率和可靠性,针对交流电磁场检测图谱信号的识别判定难点,通过查阅大量文献资料和试件检测图谱,得出了典型的信号影响因素和对应图谱,并总结归纳了平行扫描等几种实用的扫描方法。提出了ACFM裂纹检测判别的一般流程。实践表明,其有助于提高ACFM检测过程中裂纹识别判定的准确率和检测效率。In order to improve the veracity and reliability of the alternating current field measurement {ACFM）, lots of literatures and detection plots were researched in relation to the difficulty of the signal recognition and determination. This paper gained the typical signal influencing factors and corresponding identification plot for ACFM and summarized several practical scanning methods including parallel scanning. The general process of the crack identification was described based on the above research, which helped to improve the accuracy and efficiency of crack identification in engineering project.

关 键 词：交流电磁场检测（ACFM） 识别判定 扫描方法 流程 

分 类 号：TG115.28[金属学及工艺—物理冶金]