检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:谢新玲[1] 童张法[1] 黄祖强[1] 张友全[1] 赵秋菊[1]
机构地区:[1]广西大学化学化工学院,广西石化资源加工及过程强化技术重点实验室,广西南宁530004
出 处:《高分子材料科学与工程》2013年第9期73-76,81,共5页Polymer Materials Science & Engineering
基 金:广西自然科学基金重点项目(2011GXNSFD018013);广西自然科学基金资助项目(2011GXNSFB018018);广西教育厅科研基金(201103YB012);广西石化资源加工及过程强化技术重点实验室主任课题基金资助(2012Z09);广西大学科研基金(XBZ100104)
摘 要:以机械活化淀粉为接枝母体,研究了在机械活化淀粉/单体(AM)/乳化剂/油/水五元反相乳液体系中引发机械活化淀粉接枝丙烯酰胺共聚反应的动力学。分别考察了引发剂浓度、单体浓度、淀粉乳浓度和乳化剂浓度等对接枝量和接枝共聚速率(R g)的影响。结果表明,在本实验考察范围内的动力学关系式为R g∞[mSt]1.24[I]0.76[M]1.54[E]0.33,淀粉与丙烯酰胺的接枝共聚速率随体系温度升高而加快,淀粉乳浓度和单体浓度对接枝共聚速率影响显著,在45℃~60℃范围内,接枝共聚反应链增长步骤的活化能为34.85 kJ/mol。The kinetics of graft co-polymerization in the five-component inverse em41sion system, mechanicallyactivated starch/monomer/emulsifier/oil/water, were investigated using ammonium persulfate as the initiator and the mixture of Span 80/Tween 80 as the emulsifier. The effects of concentrations of initiator, monomer, starch and emulsifier on Gm and the rate orders of graft co-polymerization were determined. The results show that the dependence of the graft co-polymerization rate Rg on the components concentration in the polymerization system can be expressed for all four components by the following equation RT∞ [mSt]^1.24[I]^0.76[M]^1.54[E]^0.33. The graft copolymerization rate of acrylamide onto starch increases with the increasing of temperature. The influences of concentrations of starch and monomer on the rate orders of graft co-polymerization are predominant. The activation energy of chain propagation for the polymerization process is 34.85 kJ/mol within 45℃~60℃.
关 键 词:机械活化 淀粉 反相乳液 接枝共聚 接枝共聚速率
分 类 号:TQ316.61[化学工程—高聚物工业]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.52