检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]中国矿业大学矿业工程学院,煤炭资源与安全开采国家重点实验室,江苏徐州221008 [2]新疆地矿局第一地质大队,新疆昌吉831100 [3]山西兰花科技创业股份有限公司,山西晋城048000
出 处:《煤炭工程》2013年第9期79-82,共4页Coal Engineering
基 金:国家自然科学基金项目(51174192;50904063);江苏省研究生创新工程(CXZZ11-0310)
摘 要:以新强煤矿45051急倾斜综采工作面为工程背景,采用UDEC数值模拟计算的方法,研究不同煤层厚度、倾角及面长条件下工作面顶板的活动规律。研究表明:急倾斜煤层工作面覆岩破坏的范围主要在采空区中上部,上部顶板主要受拉伸破坏,采空区底鼓现象比较明显;煤层倾角越大,煤厚越大,面长越长,急倾斜工作面顶板活动越剧烈,其中煤层倾角对其影响最大。研究结果对急倾斜工作面围岩与支架稳定性控制具有理论指导意义。Based on No.45051 fully mechanized coal mining face in the steep inclined seam of Xinqiang Mine as an engineering background,the UDEC numerical simulation calculation method was applied to the study on the roof movement law of the coal mining face under the different seam thickness,different inclination and different face length.The study showed that the failure scope of the overburden strata above the coal mining face in the steep inclined seam was mainly at the top of the middle section in the goaf,the top roof was mainly affected by the tensile failure and the floor heave phenomenon in the goaf was obvious.The steeper seam inclination,the high thick seam and the longer coal mining face,the roof movement of the coal mining face in the steep inclined seam would be more serious and the seam inclination would have high influences to the roof movement.The study results would have theoretical guidance significances to the stability control of the surrounding rock and the powered supports in the coal mining face in the steep inclined seam.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:18.219.90.165