自制涂料印花粘合剂的应用性能  

Application property of self-prepared pigment printing binder

作　　者：李超[1] 谭艳君[1] 陈秀娜[1] 

机构地区：[1]西安工程大学纺织与材料学院,陕西西安710048

出　　处：《染整技术》2013年第10期29-31,34,共4页Textile Dyeing and Finishing Journal

摘　　要：以合成的丙烯酸乳液为基础,与氨基硅油共混制备印花色浆,探索最佳印花工艺。通过各因素的讨论,得出最佳印花工艺为:印花(涂料6%,粘合剂30%,增稠剂PFT 8%,氨基硅油5%,蒸馏水X)→烘干(80℃,3 min)→焙烘(200℃,2.5 min)。通过以上工艺条件对涤棉印花,其干湿摩擦牢度得到了明显的改善。Based on the synthesis of acrylic latex, the printing paste was prepared mixed with amino-silicone to explore the best printing process. The optimum printing condition is obtained through variety factor investigation as follow： printing （pigment 6%, binder 30%, thickener PFT 8%, amino silicone oil 5%, distilled water X） → drying （80 ℃,3 min） → baking （200 ℃ ,2.5 rain）. The dry and wet rubbing fastness improved significantly through the above process conditions for polyester cotton blend printing fabric.

关 键 词：粘合剂 丙烯酸乳液 有机硅共混 涂料 

分 类 号：TS194.2[轻工技术与工程—纺织化学与染整工程]