斜辊式矫直机矫直钢管的压扁量等参数的研究  

Technical parameters including pressing flat quantity of the tilt roller straightener while straightening tubes

作　　者：左雁冰[1] 张超[1] 黄维勇[1] 陈锋[1] 常瑜[1] 何潜[1] 刘杰[1] 

机构地区：[1]中国重型机械研究院股份公司,陕西西安710032

出　　处：《重型机械》2013年第5期35-37,共3页Heavy Machinery

摘　　要：对钢管在矫直过程中的压扁量、压扁力等工艺参数的计算时,采用英国Bronx公司的Pauk直梁计算方法,其计算结果不够精确,数值偏小。本文采用曲梁计算方法,分析了钢管在矫直过程中的压扁量、压扁力参数,推荐压扁量δ为1%～1.3%。计算结果在实践应用中证明是正确的。This paper calculated the technical parameters including pressing flat quantity and pressing flat force during the tubes being straightened. It gave the calculation method educed by the Pauk theory of the Bronx Co. Through the practical application, it proved that this calculation method is imprecise with smaller values. This paper calculated those parameters through the curved beam mldel, and recommended that the pressing flat quantity should range from 1% to 1.3%. The results have been proved accurate feasible in the practical application.

关 键 词：曲梁 压扁 压扁力 

分 类 号：TG333.8[金属学及工艺—金属压力加工]