薄壁塑件成型优化方法研究与应用  

Optimization Method Research and Application of Thin-walled Injection Parts

作　　者：王光艳[1] 梅益[1] 陈浪[1] 

机构地区：[1]贵州大学机械工程学院,材料成型及控制研究所,贵州贵阳550025

出　　处：《现代塑料加工应用》2013年第5期44-47,共4页Modern Plastics Processing and Applications

基　　金：贵州省科学技术基金(黔科合J字2183号)资助

摘　　要：运用Moldflow软件结合正交试验对薄壁塑件的成型过程进行模拟分析,用多目标优化法对多个试验指标进行综合评判,对各影响因素作方差分析,找出各因素对塑件成型质量影响的主次顺序,得出塑件成型质量最佳的工艺参数组合并进行了再模拟验证。The process of thin-walled injection parts was analyzed by Moldflow and orthogonal experiment design. The priority of factors were decided with the integrated optimal of multiple test indicators and ANOVA. The optimum process parameters combination of in- jection parts were ensured and verified by re-simulation.

关 键 词：注射成型 薄壁 模流分析 正交试验 工艺优化 

分 类 号：TQ320.66[化学工程—合成树脂塑料工业]