激光微织构表面脂润滑性能试验研究  

Experimental Research on Grease Lubrication Properties of Laser Micro-texturing Surface

作　　者：张培耘[1] 华希俊[1] 杜志华[1] 符永宏[1] 朱伟 

机构地区：[1]江苏大学机械工程学院江苏镇江212013 [2]江苏希西维轴承有限公司江苏镇江212013

出　　处：《润滑与密封》2013年第10期44-47,共4页Lubrication Engineering

基　　金：国家自然科学基金项目(51175233);江苏省科技成果转化专项资金项目(BA2010068);江苏省科技支撑计划项目(BE2010060);江苏省高校自然科学研究计划(07KJD460035);镇江市工业科技支撑计划(GY2012039)

摘　　要：采用声光调Q二极管泵浦固体光源(DPSS)Nd∶YAG激光器,在45#钢试样表面进行激光微织构加工,采用VYKO-NT1100三维形貌分析仪对微观织构形貌进行测量。以二硫化钼润滑脂为润滑剂,在MMW-1A型摩擦磨损试验机上进行微织构试样和光滑试样在不同工况条件下的摩擦性能对比试验。试验结果表明,在一定条件下,面积占有率为14%的微凹腔织构表面的脂润滑性能明显优于未织构光滑表面,且随着微凹腔面积占有率的增大,摩擦因数波动范围变小;凹槽织构表面较未织构光滑表面具有更好的润滑稳定性;在脂润滑条件下,激光微织构表面较未织构光滑表面摩擦因数最大可降低26%。45 steel specimen surfaces were textured based on Q switched diode-pumped solid-state（DPSS） Nd： YAG laser. The 3D surfaces of the specimens were scanned by VYKO-NT1100 non-contact optical profiler. The grease lubrica- tion properties of micro-textured specimens and untextured specimens were investigated with MMW-1 A friction and wear tester under MoS2 grease lubrication in operating conditions of different load and velocity. The results show that the speci- men with the area density of micro-dimples 14% shows better lubrication properties than untextured smooth specimens in given condition. The friction coefficient varies more smoothly while increasing the area density of micro-dimples. The specimens with micro-grooves exhibit better stability of lubrication than untextured smooth specimens. The friction coeffi- cient of the laser textured surface can be reduced by 26% at most, compared with the untextured smooth specimen under grease lubrication.

关 键 词：激光表面织构 脂润滑 摩擦 摩擦学 

分 类 号：TH117.1[机械工程—机械设计及理论]