基于AT9261和CAN总线的高档织机控制器上位机系统设计  

Design of Upper Computer System of High-End Loom Machine Controller Based on AT9261 and CAN Bus

作　　者：刘卫东[1] 常安涛 刘和进 吴群民 张森林[1] 

机构地区：[1]浙江大学电气工程学院,浙江杭州310027 [2]杭州五木科技有限公司,浙江杭州310013

出　　处：《轻工机械》2013年第5期41-44,50,共5页Light Industry Machinery

基　　金：浙江省智能科学基金重点项目资助(Z1090423)

摘　　要：为更好地实现对高档织机系统的有效控制,设计了基于ARM和CAN总线通信,并嵌入Linux系统的高档织机上位机系统。其中,硬件平台主要由Atmel公司生产的基于AT91SAM9261内核的嵌入式微处理器和Microchip公司生产的CAN总线控制器MCP2515进行搭建;软件设计部分包含了Linux系统下的界面应用程序设计以及CAN驱动程序实现。实验调试结果表明,系统性能稳定、快速,能很好地满足织机系统的控制要求。An upper computer system of high-end loom machine based on ARM and CAN bus communication which embedded Linux system was designed to realize the effective control of intelligent loom machine. The hardware platform was mainly built using embedded microprocessor based on A391SAM9261 kernel of Atmel company and CAN bus controller MCP2515 of Microchip. The software design was implemented in the Linux system including GUI application design and CAN bus device driver realization. Debugging results show that this system works stably and fast, and it can satisfy the control of loom machine system.

关 键 词：织机 上位机 AT91SAM9261 CAN总线 LINUX系统 

分 类 号：TS103.33[轻工技术与工程—纺织工程] TP273[轻工技术与工程—纺织科学与工程]