特高压直流输电线路大截面钢芯铝绞线选型研究  

Selection of Aluminium Cable Steel Reinforced with Large Cross-Section in UHVDC Power Transmission Lines

作　　者：布春磊[1] 周海鹰[1] 江明[1] 

机构地区：[1]中国电力科学研究院,北京市100055

出　　处：《电力建设》2013年第9期102-104,共3页Electric Power Construction

基　　金：国家电网公司科技项目(GC71-13-038)

摘　　要：导线选型在特高压直流输电工程中占有重要地位,导线选型既要满足输电线路的电气性能、机械性能的要求,又要具有一定的经济性。采用全寿命周期的经济性计算方法,对1 000 mm2和1 250 mm2不同截面及分裂数的导线在±800 kV和±1 100 kV直流输电线路中应用的技术经济性进行了比较和分析。分析结果表明,损耗小时数、上网电价对导线选型具有直接影响,导线选型应综合考虑各影响因素,确定合理的导线方案。Conductor selection is critical in the design of UHVDC power transmission project, which should not only meet the requirements of electrical and mechanical performance of transmission lines, also should be economic. The technical economy of conductors with different cross-section （ 1 000 mm2 and 1 250 mm2 ） and multiple bundled in ＋ 800 kV and _＋ 1 100 kV DC transmission lines were compared and analyzed, based on the economic calculation method of total life cycle. The analysis results show that the conductor selection is strongly influenced by power loss hour and feed-in-tariff price, so the conductor selection should comprehensively consider all the factors to determine a reasonable conductor scheme.

关 键 词：特高压 直流输电线路 大截面导线 全寿命周期 经济性分析 导线选型 

分 类 号：TM751[电气工程—电力系统及自动化]