基于Abaqus的汽车聚氨酯产品结构优化分析  

Structure optimization analysis on automobile PU product based on Abaqus

作　　者：冯博[1] 张凤桥[1] 王宏[1] 

机构地区：[1]株洲时代新材料科技股份有限公司,湖南株洲412007

出　　处：《计算机辅助工程》2013年第A02期180-183,共4页Computer Aided Engineering

摘　　要：针对某汽车聚氨酯缓冲限位块试验开裂的问题,建立限位块强度仿真模型,分析试验条件下缓冲限位块的拉应力分布情况,指出内部上端凹槽处的应力集中是造成试验开裂的原因.去除凹槽后的优化结构应力分布合理,在极限载荷下不会超过材料的断裂强度,满足设计要求.The finite element model of an automotive PU buffering stopper is built to solve crack problem. The results indicate that the stress concentration locates at the inner notch where the crack appears. The stress distribution of the buffering stopper is rational after the inner notch is cleared. The stress is lower than the crack strength. The structure satisfies the design requirements.

关 键 词：缓冲限位块 聚氨酯 结构优化 拉应力 

分 类 号：U465[一般工业技术—材料科学与工程]