微电解处理工艺及传统填料存在问题与改进措施  

EXISTING PROBLEMS AND IMPROVEMENT MEASURES OF MICRO-ELECTROLYSIS PROCESS AND CONVENTIONAL FILLER

作　　者：秦树林[1] 赵岳阳[2] 王忠泉[1] 

机构地区：[1]煤炭科学研究总院杭州环保研究院,浙江杭州311201 [2]杭州市萧山区环境保护局,浙江杭州311201

出　　处：《能源环境保护》2013年第5期8-10,23,共4页Energy Environmental Protection

基　　金：中国煤炭科工集团技术创新项目(2013MS016);浙江省科技厅社会公益性技术应用研究计划项目(2010C33G3040004)

摘　　要：微电解工艺通过电化学、氧化、还原、吸附及絮凝等协同作用,实现脱色、去除有机污染、降低毒性、改善可生化性等目的,具有适用范围广、处理效果好、成本低、工程可操作性强、低碳环保等优点,是目前处理难降解有机废水的一种较为理想的工艺,但传统微电解填料存在诸多制约其工程应用的瓶颈问题,本文将通过对微电解工艺原理、传统微电解填料存在问题等具体分析,提出解决传统铁炭微电解填料存在板结、堵塞等关键问题的方法及措施,为今后新型高效微电解填料的制备及拓展微电解工艺应用范围提供参考。Micro-electrolytic process is an ideal technology currently by treatment of refractory organic wastewater.Bleaching, removal of organic pollution, reduced toxicity, biodegradability improvement are achieved by synergy of electrochemistry,oxidation,reduction,adsorption and flocculation and so on.The technology has a wide range of application, effective, low cost, strong operability, low carbon environmental protection advantages.And conventional microelectrolysis filter packed bottleneck of restricting its application.This article analyzes the micro-electrolysis technology and packing problems of conventional filler .The solution to the key issues and measures of compaction ,blockage is provided for reference of new micro-electrolytic preparation of fillers in the future and expand the scope of application.

关 键 词：微电解工艺 传统填料 可生化性 

分 类 号：X703[环境科学与工程—环境工程]