用于标定CCD相机的高精度数控LED点光源  

High precision digital control LED spot light source used to calibrate CCD camera

作　　者：郭汉洲[1] 吴振刚[1] 宋宣晓[1] 

机构地区：[1]长春理工大学光电工程学院,吉林长春130033

出　　处：《中国光学》2013年第5期759-766,共8页Chinese Optics

基　　金：国家大学生创新创业训练计划资助项目(No.2012S13)

摘　　要：介绍了一种以发光二极管(LED)点光源作为相机标定光源的方法。根据LED点光源的特性,用恒流源给LED点光源提供所需的电流,用光照度计测量LED光源的光强度。由ARM单片下位机控制恒流源;通过串行通讯与上位机交换数据;由计算机作为上位机来管理数控恒流源和光照度计;根据所测光度值来调节电流,直到光度达到预想值。实验分析显示:LED点光源作为标定光源可以达到CCD标定的要求,精度也较高,能够很好地自适应控制LED的光照强度,达到了预期的效果,且系统使用方便灵活,性能稳定可靠。This paper introduces a method that uses a Light Emitting Diode （LED） point light source as the camera calibration light. According to the characteristics of the LED point light source, a constant current source is used to provide the necessary current and a illuminometer is used to measure the luminance of the LED point light source. The constant current source is controlled by an ARM MCU and its data are exchanged with the host computer through the mode of serial communications. The PC is used as the host computer, and it adjusts the current according to the luminance of the LED point light source until the luminance achieves an anticipated value. Experimental analysis shows that the LED point light meet the requirements of the The system is convenient and calibration light source, and can adaptively flexible, and its performance is stable and source with a higher precision can control the luminance of LED well. reliable.

关 键 词：标定光源 发光二极管 CCD CCD相机 

分 类 号：TN312.8[电子电信—物理电子学] V447.3[航空宇航科学与技术—飞行器设计]