检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:叶胜利[1] 徐伟民[1] 邵长岭[1] 刘敏 陈晓春 郝军
机构地区:[1]浙江中烟工业有限责任公司杭州卷烟厂,杭州310008 [2]中国建筑设计咨询公司,北京100120
出 处:《建筑节能》2013年第10期26-28,共3页BUILDING ENERGY EFFICIENCY
摘 要:以杭州地区某一高架库为例,基于高架库的负荷分布特点以及平面布局,提出较好地满足高架库室内参数均匀性要求的气流组织形式:下部侧送+上部顶送、车间中部和上部回风,然后根据负荷分布位置的不同来分配送风量。采用CFD手段对上下层不同风量比例时的气流组织进行模拟分析,分析表明,上下层风管的设计送风量比例为:夏季为1.783:1,冬季为3.178:1,可以很好地满足室内设计要求。New allow patterns meeting demand of indoor aigqow parameter uniformity are proposed, including low sidewall air supply + ceiling air supply, middle return and ceiling return, based on load distribution and layout of a high-bay depot of a tobacco factory in Hangzhou. Air-supply volume is evaluated with CFD software for various locations of air conditioning loads. The results indicated that the in-door uniformity requirement can be achieved well when the air volume ratio of the upper air supply pipe and the lower air supply pipe was 1.783:1 in summer and 3.178:1 in winter.
分 类 号:TU831[建筑科学—供热、供燃气、通风及空调工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.117