平板真空玻璃支撑点消除玻璃表面应力设计  

Design for Relieving Stress on Glass Surface by Adjusting the Supporting Point of Flat Vacuum Glass

作　　者：倪堡瑞[1] 李葆红[1] 王勇[1] 王永波[1] 金钱[1] 卢宝第[1] 

机构地区：[1]大连交通大学,大连市116028

出　　处：《玻璃》2013年第10期33-34,共2页Glass

摘　　要：随着现今社会新材料、新工艺、新技术的不断出现,许多旧工艺逐渐被替代,而关于新型真空平板玻璃的研究更是成为热点。文中对真空玻璃和支撑物的强度进行了计算,在1m^2的平面玻璃上,可放置成30×30的点隙,点阵间距为33mm×33 mm。A lot of old process were replaced as the new materials , new techniques , and new process are coming out endlessly. The research of new flat vacuum glass becomes hotspot. In this paper the strength of vacuum glass and its support were calculated. Results show that 30×30 pits can be put on the lm^2 of flat glass and the lattice distance is 33mm×30mm.

关 键 词：真空玻璃 支撑物 抗压强度 传热系数 low-E钢化玻璃 热辐射 

分 类 号：TQ171[化学工程—玻璃工业]