背提包缝合强度与缝合宽度之间的关系研究  

Study on Relationship between Suture Strength and Suture Width of Handbag and Knapsack

作　　者：邓成亮[1,2] 孙世彧[1,2] 陈宗良[1,2] 黎艳莹[1,2] 

机构地区：[1]广州市质量监督检测研究院,广东广州510110 [2]国家皮革制品质量监督检验中心(广州),广东广州510110

出　　处：《西部皮革》2013年第20期42-45,共4页West Leather

摘　　要：着重研究了缝合强度与缝合宽度,以及缝合宽度与缝线滑脱之间的关系。结果表明,缝合宽度越宽,缝线滑脱程度越小,则缝合强度越大。考虑到实际检测受裁样的限制,确定了100 mm为最佳测试宽度,并得出在最佳测试宽度下的缝合强度较60 mm时的缝合强度增长分布情况,可供实际检验工作参考。In this paper we focused on investigating relationship between the suture strength anti suture width, and also between the suture width and the suture slippage. The results indicated that the wider the suture width was, the smaller the degree of suture slippage, and further the greater the suture strength. Taking into account the cutting restrictions of actual test samples, it was determined that 100mm was the optimal width. Then enhancement and distribution of the suture stre^lgth was obtained compared with that of 60ram as suture width. This can be used for practical test reference.

关 键 词：背提包 缝合强度 缝合宽度 

分 类 号：TS563[轻工技术与工程—皮革化学与工程]