耐火耐侯钢热装温度对高温性能与组织的影响  

Influence of hot charging temperature on high Temperature performance and microstructure of fire resistant weathering steel

作　　者：帅习元[1] 黄静[1] 仇东丽[1] 周勇[1] 夏艳花[1] 

机构地区：[1]武钢研究院,湖北武汉430080

出　　处：《武钢技术》2013年第5期19-22,35,共5页Wisco Technology

摘　　要：对耐火耐侯钢的高温性能进行热模拟研究,发现该钢在500℃装炉时钢的高温强度最低,比冷装炉钢的高温强度低20MPa,600℃装炉时钢的高温强度最高,比冷装炉钢的高温强度高40MPa。总体来说,热装不会影响该钢的高温性能,热装温度高于600℃对该钢的高温性能更为有利。600℃以下装炉,该钢加热奥氏体晶粒度与冷装的差不多。600℃以上装炉,加热奥氏体晶粒度比冷装炉的要小1级左右。This paper studied the high-temperature behavior of the fire resistant weathering steel through thermal simulation. The results showed that the high-temperature strength was the lowest at the charging temperature of 500 ℃, which was 20 MPa lower than that of cold charging; and the highest at 600 ℃ ,which was 40 MPa higher than that of cold charging. In a word,hot charging had no impact on the high-temperature strength of this steel, while the high-temperature properties would be better with the hot charging temperature over 600 ℃. The austenite grain size would be similar to cold charging, when the hot charging temperature was below 600 ℃ ;while the grain size would be one grade smaller when the hot charging tem- perature above 600 ℃.

关 键 词：耐火耐侯钢 热装 生产工艺 

分 类 号：TG33[金属学及工艺—金属压力加工]