检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:孙建立[1] 王续跃[1] 高航[1] 杨连文[1]
机构地区:[1]大连理工大学,大连116024
出 处:《中国机械工程》2013年第21期2872-2875,2920,共5页China Mechanical Engineering
基 金:国家科技重大专项(2009ZX04014-066-02)
摘 要:介绍了依据五轴联动加工原理避免弯管内表面加工干涉和改善切削不均匀的加工方法,进行了实验工艺规划、加工区域划分、数控程序编制等研究。采用球头刀具,调整刀具姿态,使刀具和工件表面的位置角近似不变,在四轴及五轴联动机床上进行了样件的试制。研究结果表明,该铣削加工方法可避免刀具与工件的局部干涉和整体干涉;切削状态稳定;最终表面质量一致性好,粗糙度满足技术要求(Ra=3.2μm)。研究结果为核电主管道以及同类弯管内表面的铣削加工提供了理论和试验依据。Based on the principles of 5--axis machining,a method was introduced, which avoided processing interference and improved the cutting condition on the internal surfaces of bent pipe. Exper- imental process planning,machining zoning,and CNC programming were carried out. A sample piece was worked out in the 4--axis and 5--axis machining process using a ball--end miller and the posture of the tool was adjusted. Meanwhile,the angle between the miller and workpiece was nearly constant. The results show that the ball--end miller avoids both partial and whole interferences,and the cutting status keeps stable. The final surface quality has a good uniformity and satisfies the technical request (Ra= 3.2μm). The research provides a machining technology of main pipe internal surfaces for nucle- ar power station and similar type of bent pipes in theory and application.
分 类 号:TG659[金属学及工艺—金属切削加工及机床]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.38