超(超)临界蒸汽疏水阀内部空化模拟  

Numerical Study of Cavitation Flows in Ultra-supercritical Steam Trap

作　　者：李树勋[1,2] 胡建华[1,2] 李连翠[1,2] 徐晓刚[1,2] 张兴[1,2] 

机构地区：[1]兰州理工大学石油化工学院,甘肃兰州730050 [2]机械工业泵及特殊阀门工程研究中心,甘肃兰州730050

出　　处：《四川大学学报（工程科学版）》2013年第5期145-153,共9页Journal of Sichuan University (Engineering Science Edition)

基　　金：科技部科技人员服务企业行动项目(2009GJG10005);兰州理工大学"优秀青年教师培养计划"资助项目(Q201002)

摘　　要：针对超(超)临界高温高压蒸汽疏水阀,将空化模型和混合两相流模型相结合,应用标准k-ε湍流模型,对疏水阀内部空化流动进行数值模拟。根据模拟结果,预测了疏水阀内部空化的发生与发展情况,并研究了不同开度、不同入口压力及不同密封面角度对内部空化流动的影响。同时进行了疏水阀防空化研究。结果表明,该计算可有效模拟疏水阀内部空化流动情况;随着开度的增加,空化先出现在阀座处,然后慢慢发展,在阀底部流道中形成了大量空化流动;随着进口压力的增大,空化程度越大,区域越大,延续越长;阀芯与阀座密封面角度为45°时,阀座处空化强度最低,区域最少;加入三级套筒与均流罩,有效抑制了阀内部空化的发生与发展。Internal cavitation flow was numerically simulated in the ultra-supercritical steam trap by combining cavitation model and twophase flow model and using the standard k- ε model. The occurrence and development of internal cavitation in the valve were predicted and internal cavitation flow of the valve was studied under these conditions of different openings,different inlet pressures,different angles of sealing surface. Meanwhile,the anti-cavitation of the trap was studied. The results showed that the cavitation flow is well predicted. With the increase of opening the cavitation appears at the valve seat,developing gradually,finally a large number of cavitation form at valve bottom near wall. With the rise of inlet pressure,the cavitation intensify. When the angle of sealing surface becomes 45 degree,cavitation at the valve seat becomes lowest. Installing three-stage sleeve can restrain the occurrence and development of cavitation effectively.

关 键 词：超(超)临界 蒸汽疏水阀 空化 计算流体动力学 

分 类 号：TH134[机械工程—机械制造及自动化]