聚合硫酸铁铝处理印染废水  

Analysis on Polymeric Aluminum Ferric Sulfate(PFAS)in Printing and Dyeing Wastewater Treatment

作　　者：郑怀礼[1] 冯力[1] 蒋贞贞[1] 尹航 阳春[1] 谭铭卓 唐晓旻[1] 

机构地区：[1]重庆大学教育部三峡库区生态环境重点实验室,重庆400045 [2]重庆市水利投资(集团)有限公司,重庆401121 [3]江门市慧信净水材料有限公司,广东江门529000

出　　处：《土木建筑与环境工程》2013年第5期1-6,共6页Journal of Civil,Architectural & Environment Engineering

基　　金：国家自然科学基金(51078366);重庆市工业发展基金(产研专项:10-cxy-09)

摘　　要：以钛白粉副产品七水硫酸亚铁和工业含铝材料为原料,研制了1种无机高分子复合絮凝剂聚合硫酸铁铝(PFAS)用于印染废水处理,通过扫描电镜分析发现新合成的聚合硫酸铁铝具有独特的空间立体褶皱状结构。在单因素的基础上,探究了pH和PFAS投加量对印染废水的COD、浊度去除效果和形成污泥体积的影响,以及PFAS与常见絮凝剂(PFS、PAC和CPAM)对印染废水除COD、除浊效果和生成污泥体积的比较研究。试验结果表明:当PFAS投加量为0.30g/L,pH为8.5时,印染废水的COD去除率达到83.0%,浊度去除率可达到95.0%,生成污泥体积为52.8mL,PFAS对印染废水的COD和浊度去除效果优于PFS、PAC和CPAM。Polymeric aluminum ferric sulfate （PFAS） was developed by Industrial Grade ferrous sulfate heptahydrate and industrial aluminum sulphate（16% Al2O3）. PFAS was used for printing and dyeing wastewater treatment. The new synthetic Polymeric aluminum ferric sulfate （PFAS） with a unique spatial fold-like structure was discovered by scanning electron microscopy analysis （SEM）. The treatment efficiency was evaluated by investigated sludge volume and the reduction of removal rate of COD and turbidity of printing and dyeing wastewater by using single factor. The results show that the removal rate of COl） is achieved 83.0%, the removal rate of turbidity is achieved 95.0% and the sludge volume is 52. 8 mL when the coagulant dosage is 0.3 g/L and pH is 8.5. Meanwhile, compared with the common coagulant （PFS, PAC and CPAM） in application of printing and dyeing wastewater treatment, the performance on the removal of COD and turbidity of self-make PFAS is better than those of PFS, PAC and CPAM.

关 键 词：水处理剂 聚合硫酸铁铝 印染废水 水处理 

分 类 号：X703[环境科学与工程—环境工程]