邻二氮杂菲法分光光度法测定保护渣中的铁  

The Determination of Iron Content in Metallurgy Continuous Casting Powder by O-Phenanthroline Spectrophotometry

作　　者：邵梅[1] 闻向东[1] 魏忱[2] 张穗忠[1] 

机构地区：[1]武汉钢铁集团公司研究院,湖北武汉430080 [2]华中师范大学第一附属中学,湖北武汉430223

出　　处：《广东化工》2013年第20期103-105,共3页Guangdong Chemical Industry

摘　　要：试样以盐酸、氢氟酸、硝酸分解,高氯酸冒烟至近干,稀盐酸溶解浸取盐类,以抗坏血酸还原铁(III)至铁(II)。在乙酸-乙酸钠缓冲溶液中,邻二氮杂菲与铁(II)生成橙红色络合物,于分光光度计510 nm出测量吸光度。文章对该方法的试样分解条件、显色条件、共存离子干扰以及测量范围进行了分析和讨论,并进行了实际样品的回收率和对照试验,试验结果表明该方法测定的灵敏度、准确度、精密度均能满足保护渣日常检验分析的要求。A method was introduced in this paper that the content of the iron in metallurgy continuous casting was determined by o-phenanthroline spectrophotometry, and its influencing factors and results were discussed. The results showed that the recovery rate was 98.06 %-102.50 %, the relative standard deviation （RSD） was less than 1.50 %. Spectrophotometry was a fast and simple method with high accuracy and sensitivity, which could be used for the quality control of iron in metallurgy continuous casting powder.

关 键 词：保护渣 分光光度法 邻二氮杂菲 铁 

分 类 号：TQ[化学工程]