检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:刘莉莎[1] 郭永昌[1] 谢建和[1] 张剑洪[1] 李鸣威 岑羽乔
机构地区:[1]广东工业大学土木与交通工程学院,广东广州510006
出 处:《混凝土》2013年第10期83-86,共4页Concrete
基 金:国家自然科学基金(51278132);广东省科技攻关项目(2011B010400024);广东省交通厅科技计划(2013-02-017;2013-04-006);广州市黄埔区科技计划(201356)
摘 要:通过对立方体和圆柱体试件的抗压试验,重点分析了橡胶掺量(0、4%、8%、12%和16%)对RSRAC新型材料的破坏形态、应力-应变曲线、抗压强度、弹性模量(刚度)和耗能能力(延性)的影响。试验结果显示,随着橡胶掺量的增大,RSRAC的强度和刚度呈现逐渐下降的趋势,但影响程度不大;RSRAC材料的延性随着橡胶掺量的增加则呈现先增后减的趋势,并在橡胶掺量为8%时获得延性的最大值。This paper carried out a compressive test on cubes and cylinders, respectively.The effects of rubber content (0,4%, 8%, 12% and 16% ) on the compressive behaviors, including failure mode, stress-strain curves, compressive strength, Young's modulus (stiffness) and energy absorption capacity( toughness ) of mixes were obtained and analyzed.The results showed that the compressive strength and stiffness of RSRAC mixes decreased with the increase of rubber content; suitable rubber content made contribution to the improvement of compressive touglmess of RSRAC mixes, with the larger toughness appeared at the rubber contents of 8%.
分 类 号:TU528[建筑科学—建筑技术科学]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.117