不同淬火温度下Ni9钢低温韧性的研究  

Study on Low Temperature Toughness of Ni9 Steel under Different Quenching Temperature

作　　者：刘彦明[1] 周勇[1] 石凯[1] 

机构地区：[1]西安石油大学,陕西西安710065

出　　处：《科技创新与生产力》2013年第10期87-90,共4页Sci-tech Innovation and Productivity

摘　　要：研究了双相区热处理中不同淬火温度和亚温淬火温度对Ni9铜显微组织和-196℃下冲击韧性的影响．并利用光镜、透射电镜（TEM）、扫描电镜（SEM）对Ni9钢在不同热处理条件下的组织形态、分布及低温冲击断口形貌进行了观察分析。发现淬火温度对Ni9钢的低温冲击韧性的影响不大；亚温淬火温度对低温冲击韧性有较大的影响，接近c1时冲击功最大，接近Ac3时次之，而介于Ac1-Ac3中间的温度，其低温韧性较低。The two-phase region at different heat treatment and quenching temperature subcritical quenching temperature on Ni9 steel microstructure and -196℃ lower impact toughness were studied. By using light microscopy, transmission electron microscopy （TEM）, scanning electron microscopy （SEM） on Ni9 steel heat treatment conditions at different morphology, distri- bution, and Iow-temperaturc impact fracture morphology were observed and analyzed. Quenching Temperature on Ni9 tbund low temperature impact toughness of steel has little effect; subcritical quenching temperature on the low temperature impact toughness have a greater impact, the impact energy when approaching Ac1 maximum when approaching Ac3 second, and be- tween Ac1- Ac3 middle temperature, low-temperature toughness is low.

关 键 词：Ni9钢 低温冲击韧性 亚温淬火 回转奥氏体 

分 类 号：TG161[金属学及工艺—热处理]