Relationship between the Flow Blockage of Tip Leakage Vortex and its Evolutionary Procedures inside the Rotor Passage of a Subsonic Axial Compressor  

作　　者：DU Hui YU Xianjun ZHANG Zhibo LIU Baojie 

机构地区：[1]National Key Laboratory of Science & Technology on Aero-Engine Aero-Thermodynamics,School of Energy and Power Engineering,Beihang University

出　　处：《Journal of Thermal Science》2013年第6期522-531,共10页热科学学报（英文版）

基　　金：funded by the National Natural Science Foundation of China,Grant No.51006007,51136003 and 50976009

摘　　要：The near casing flow fields inside the rotor passage of a 1.5 stage axial compressor with different blade-loading levels and tip gap sizes were measured by using stereoscopic particle image velocimetry(SPIV). Based on a carefully defined blockage extracting method, the variations of blockage parameter inside the blade passage were analyzed. It was found that the variation of blockage parameter appeared as a non-monotonic behavior inside the blade passage in most cases. This non-monotonic behavior became much more remarkable as the blade loading increases or mass flow rate decreases.The variations of the blockage parameter inside the blade passage had close relation to the evolutionary procedures of the tip leakage vortex(TLV). The destabilization of the TLV caused a rapid increasing of the blockage parameter. After the TLV lost the features of a concentrated streamwise vortex,the blockage parameter usually got a peak value. And then, because of the intense turbulent mixing between the TLV low momentum flow and its surrounding flows, the flow deficit inside the TLV recovered.

关 键 词：tip leakage vortex flow blockage unsteady flow axial compressor TURBOMACHINERY 

分 类 号：TH45[机械工程—机械制造及自动化]