高效锰系脱氧剂的研制及性能测试  

Preparation and performance test of efficient Mn-deoxidizers

作　　者：陈耀壮[1] 李洁[1] 赵国强[1] 雷菊梅[1] 赵英[1] 

机构地区：[1]西南化工研究设计院有限公司工业排放气综合利用国家重点实验室,四川成都610225

出　　处：《工业催化》2013年第10期36-40,共5页Industrial Catalysis

摘　　要：采用可分解的锰化合物作为锰源,以分子筛作载体,添加黏结剂和扩孔剂,用混合法制备了Mn/分子筛脱氧剂,并对Mn/分子筛脱氧剂进行XRD物相、孔结构、X射线荧光元素及SEM表面形貌分析.在进口氧体积分数小于600×10-6、原料气空速1000h-1、脱氧温度（200～250）℃和活化温度250℃条件下,脱氧后气体中的残氧体积分数小于0.2×10-6,脱氧容量大于25 mL·g-1.该脱氧剂性能优异,强度高,适用于较高氧含量的气体脱氧,能满足工业化生产要求.Using decomposable manganese compounds as manganese source, the zeolite as the support, and adding the binder and the pore-expanding agent, Mn/zeolite deoxidizers were prepared by mixing method. Mn/zeolite deoxidizers were characterized by XRD, porosity analysis, XRF and SEM. The deoxidi- zing activities were investigated under the reaction condition of inlet oxygen concentration below 600 x 10 -6 （ v/v）, raw material space velocity 1 000 h - 1, deoxidizing temperature （ 200 - 250 ） ℃ and activation temperature 250 ℃. The deoxidizing capacity was over 25 mL . g - 1, and residual oxygen in the exhaust gas was 0.2 x 10-6（v/v）. Mn/zeolite catalysts exhibited high strength and excellent deoxidation performance under high oxygen concentration, and could meet the recmirement of commercial application.

关 键 词：催化剂工程 MN 分子筛脱氧剂 锰 黏结剂 扩孔剂 

分 类 号：TQ426[化学工程] O643.36[理学—物理化学]