检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:储汉东[1,2] 徐光黎[1,2] 李鹏鹏[1,2] 朱可俊[3] 吴灌洲[3]
机构地区:[1]岩土钻掘与防护教育部工程研究中心,武汉430074 [2]中国地质大学工程学院,武汉430074 [3]中国水电顾问集团成都勘测设计研究院,成都610072
出 处:《工程地质学报》2013年第5期688-695,共8页Journal of Engineering Geology
摘 要:大型地下洞室岩体质量受诸多因素影响,围岩分类相对复杂,综合运用几种围岩分类方法有利于准确确定围岩的综合类别。在试验资料和长期现场地质工作的基础上,利用RMR、Q、HC、BQ及RMi分类方法,对大岗山水电站代表性洞室—主厂房围岩进行分类,并通过对分类结果的回归分析,得出Q值与RMR值、HC值,RMi值与HC值、RMi值与RMR值呈指数关系,相关系数依次为0.91、0.82、0.87、0.94;Q值与RMi值呈乘幂关系,RMR值与HC值呈线性关系,相关系数分别为0.90、0.85;[BQ]值与HC值、RMR值呈线性关系,而与Q值、RMi值分别呈指数、对数关系,相关系数依次为0.49、0.38、0.38、0.40。研究结果表明,RMR、Q、HC及RMi分类方法相关性好,可互相补充、验证,有效应用于工程实践中;BQ分类与另4种分类相关性较差,在该水电站及类似工程中适用性相对较小。The rock mass quality surrounding large underground cavern is affected by many factors.The rock classification is relatively complex.Using several rock classification methods synthetically is propitious to accurately determine the integrated category of the surrounding rocks.The classifications called RMR,Q,HC,BQ and RMi are used to classify the rocks of the main workshop on the basis of the experimental data and long-term field geological work.The workshop is the representative cavern of Dagangshan hydropower station.The study is conducted by means of regression analysis.The results show that among Q value,RMR value,and HC value there are exponential relations.The same circs also appears between RMi value and HC value,between RMi value and RMR value.The correlation coefficients for each of the pairs are 0.91,0.82,0.87,0.94 respectively.Meanwhile,Q value and RMi value,RMR value and HC value have shown power relations,linear relations respectively.Accordingly,the correlation coefficients between each of them are 0.90 and 0.85 respectively.Between BQ value and HC value,the RMR value show linear relations,while between BQ value and Q value,the RMi value show exponential relation and logarithmic relation in sequence.The correlation coefficients between each of them are 0.49,0.38,0.38,and 0.40 respectively.The results also show that the correlation of RMR,Q,HC,and RMi classification are close related.They can complement and verify each other.They can be effectively applied to engineering practice.The BQ classification has poor correlation with the other four kinds of classification,so it is not very suitable to be used in the power station and similar projects.
分 类 号:TU923[建筑科学—建筑设计及理论]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.38